Vorige
Volgende
LSL Stuurklemmen-set ZRX11-/1200 28,6/zilver
Product beschrijving
X-Bar Clamps (KM45) silver or black for 28.6 mm handlebars suitable for following vehicle:
Kawasaki
ZRX 1100
ZRX 1200
Material: Aluminium
Material treatment: anodized
Offset: + 20 mm
Fixing: on original fixing points
Dimensions: 28.6 mm Clamps
Our model-specific X-Bar Clamps are mounted on the original fixing points. So many models with original 22.2mm handlebars can mount an X-Bar handlebar.
On models with standard rubber mounts, this is retained. Depending on the model, the handlebar position changes from -50mm to +30mm, the value for your motorcycle is indicated under offset.
NEWNOTE IMPORTANT NOTE: Please check before conversion whether the vehicle intended for conversion is listed in the attached ABE!
There are different conditions and requirements for each vehicle that allow the terminal blocks to be modified.
The model assignments of the LSL terminal blocks listed in the ABE are tested for use with the vehicle's standard driver.
The additional use of an LSL accessory handlebar is possible, but may require additional modifications to the vehicle (longer wires or cables) due to a different shape of the handlebar.
The increase of the original handlebar may also result in additional modifications to the vehicle.
Check whether the following conditions apply to your vehicle (-see ABE):
- Use permitted when using a compensating pad for the triple clamp
- With 20 mm longer brake line Use permitted
- With 30 mm longer brake line Use permitted
- With LSL instrument holder Use permitted
Failure to observe these conditions will invalidate the operating permit for the vehicle!
Kawasaki
ZRX 1100
ZRX 1200
Material: Aluminium
Material treatment: anodized
Offset: + 20 mm
Fixing: on original fixing points
Dimensions: 28.6 mm Clamps
Our model-specific X-Bar Clamps are mounted on the original fixing points. So many models with original 22.2mm handlebars can mount an X-Bar handlebar.
On models with standard rubber mounts, this is retained. Depending on the model, the handlebar position changes from -50mm to +30mm, the value for your motorcycle is indicated under offset.
NEWNOTE IMPORTANT NOTE: Please check before conversion whether the vehicle intended for conversion is listed in the attached ABE!
There are different conditions and requirements for each vehicle that allow the terminal blocks to be modified.
The model assignments of the LSL terminal blocks listed in the ABE are tested for use with the vehicle's standard driver.
The additional use of an LSL accessory handlebar is possible, but may require additional modifications to the vehicle (longer wires or cables) due to a different shape of the handlebar.
The increase of the original handlebar may also result in additional modifications to the vehicle.
Check whether the following conditions apply to your vehicle (-see ABE):
- Use permitted when using a compensating pad for the triple clamp
- With 20 mm longer brake line Use permitted
- With 30 mm longer brake line Use permitted
- With LSL instrument holder Use permitted
Failure to observe these conditions will invalidate the operating permit for the vehicle!
| Keurmerk | ABE Gekeurd |
|---|